KM107 acceleration transmitter

A new generation of transmitter, mainly for equipment manufacturers small compressor or small water pump, motor, or only need to perform simple vibration monitoring of the machinery of the user design, it adopts built-in signal conversion function, eddy current probe preamplifier and signal conditioner function integrated in one, through the two-wire circuit power supply, output and shaft vibration proportional to the 4 ~ 20mA signal, sent to PLC or DCS for process control, while BNC joint output buffer signal for data acquisition and vibration analysis. The KM550 shaft vibration test system consisting of probe and extension cable greatly reduces the user's equipment and wiring costs, and is an ideal system for vibration monitoring of small equipment. A new generation of transmitter, mainly for equipment manufacturers small compressor or small water pump, motor, or only need to perform simple vibration monitoring of the machinery of the user design, it adopts built-in signal conversion function, eddy current probe preamplifier and signal conditioner function integrated in one, through the two-wire circuit power supply, output and shaft vibration proportional to the 4 ~ 20mA signal, sent to PLC or DCS for process control, while BNC joint output buffer signal for data acquisition and vibration analysis. The KM552 shaft vibration test system consisting of probe and extension cable greatly reduces the user's equipment and wiring costs, and is an ideal system for vibration monitoring of small equipment. technical specification electrical characteristics Power supply: 12~35VDC, upper computer power supply. Sensor power supply: -23~-30VDC < 12mA Frequency response: 2.0~3,000Hz (±3dB). External sensor: eddy-current sensor Interface: Coaxial interface Sensitivity: 8.0mV/μm (200mV/mil): Full scale: 2.00mm; Range range: 0.35mm~2.35mm Probe mounting gap voltage Vibration: 8.0±0.5V Displacement: 10.0+/0.25V Output impedance: 10kΩ Buffered output: the original signal (-2~-18V) output input Output impedance: 10kΩ, maximum output distance 3 meters Explosion-proof grade: Exia II.CT4   physical characteristics Working temperature: -35°C~+85°C storage Storage temperature: -40°C~+120°C Humidity: 0~95%, non-condensing Dimensions: 80(L)X35(W)×70(H). Weight: 300g   > security authentication CAS Class I,Div.1,Groups A,B,C&D Class II,Zone 0,Ex ia IIC T4 PCEC:Ex ia IIC T4 ATEX:IⅡ1G,Ex ia ⅡC T4@Ta=-40℃~100℃